Quick Answer: What Is A Class C Network?

What is a Class C subnet?

A class C network would have a subnet mask of 255.255.

255.0 which means that 24 bits are used for the network.

In CIDR notation this is designated by a /24 following the IP address.

So: IP address 192.168..

What is the difference between Class A Class B and Class C networks?

If the address is written in decimal format, the first number determines the address. If the first number is between 0 and 127 inclusive, the address is class A. If the first number is between 128 and 191 inclusive, the address is class B. If the first number is between 192 and 223 inclusive, the address is class C.

What is class in IP address?

TCP/IP defines five classes of IP addresses: class A, B, C, D, and E. Each class has a range of valid IP addresses. … IP addresses from the first three classes (A, B and C) can be used for host addresses. The other two classes are used for other purposes – class D for multicast and class E for experimental purposes.

What is a Classful subnet?

Classful subnetting is a method of splitting a classful network number into two or more smaller subnets. The subnets will all be the same size, determined by the maximum number of hosts per subnet. A single custom subnet mask is used to configure the subnets.

Who uses Class A IP addresses?

Class A IP addresses are used for huge networks, like those deployed by Internet Service Providers (ISPs). Class A IP addresses support up to 16 million hosts (hosts are devices that connect to a network (computers, servers, switches, routers, printers…etc.)

How many hosts are there in Class C IP address?

Table 2-1 IP Addresses Available to Internet HostsAddress ClassFirst Octet RangeNumber of Hosts Per NetworkClass A0 to 12616,777,214Class B128 to 19165,534Class C192 to 223254Aug 27, 2004

What is a Class C IP address?

Class C Address Class C IP addresses range from 192.0. … The default subnet mask for Class C is 255.255. 255. x. Class C gives 2097152 (221) Network addresses and 254 (28-2) Host addresses.

Why the Class C is most commonly used network class?

Class A IP addresses – range from 0-127 in the first byte….Classes of IP Addresses.ClassPurposeBThese are designed to be used in medium-sized companiesCThey designed to be used in small-sized companies.DThey are not used in the public sector, instead being reserved for multicast addressing2 more rows

What are Class C IP addresses used for?

“Class C” IPv4 addresses are used for small-sized networks. Please note below important points about Class C network IP addresses. First three octets of a “Class C” network IP address is used to identify the “Network part” and the remaining one octet is used to identify a host uniquely within that network.

What are the 3 major classes of an IP network?

Currently there are three classes of TCP/IP networks. Each class uses the 32-bit IP address space differently, providing more or fewer bits for the network part of the address. These classes are class A, class B, and class C.

What is a Class C IP address example?

Examples of class C IP address are: – 192. 168.1. 1, 200. 0.0.

How many networks are there in Class C?

Classful addressing definitionClassLeading bitsNumber of networksClass A0128 (27)Class B1016,384 (214)Class C1102,097,152 (221)Class D (multicast)1110not defined1 more row